Water Polo Scoreboard Software
4 × 8 minutes with a stopped clock, shot clock 28 / 18 seconds, 18-second exclusions with up to six timers per team, two 60-second timeouts per team and match. A goal ends all exclusions of both teams.
waterBoard7 water polo, canoe polo and underwater sports, one licence
waterBoard7 puts the match clock, the 28/18-second shot clock, exclusion timers with the cap number and the timeouts on your poolside LED display, projector or NDI stream. Canoe polo, underwater rugby and underwater hockey are included in the same licence.
Four periods of 8 minutes (P1 to P4) and a shot clock with 28 and 18 second resets. A goal pauses the clock and resets the shot clock to 28.
18-second exclusions shown with the cap number, up to six per team at once. A goal ends the running exclusions of both teams.
60-second timeout countdown with the timeouts used per team, and a penalty shootout with scored and missed shots.
Standard, Sponsored, Advertisement and Chroma Key boards, each with its own design, plus NDI output for vMix, OBS or a vision mixer.
Goal, exclusion, red card and substitution screens, team line-ups, referees, sponsors, match timeline, standings, results and fixtures.
Run score, clock, shot clock and penalties from a phone or tablet browser, PIN protected, with several officials at once.
22 short lessons show how to run a match and set up the board. Water polo operators can watch only the part they need. Each video has on-screen captions and no narration.
Watch on YouTube
Each discipline button in the Match Rules window loads the factory values of that sport: periods, penalty buttons, goal rules, timeouts and shot clock. Every value stays editable, and Save and Apply keeps it for the next matches.
4 × 8 minutes with a stopped clock, shot clock 28 / 18 seconds, 18-second exclusions with up to six timers per team, two 60-second timeouts per team and match. A goal ends all exclusions of both teams.
Two halves of 10 minutes (H1, H2), a 60-second shot clock and 2-minute suspensions, two at a time per team. A goal ends the oldest suspension of the team that conceded. Timeouts can be switched on.
Two halves of 15 minutes with a stopped clock, 2-minute penalties with up to three per team, one 60-second timeout per team and half. No shot clock on the panel or the board.
Two halves of 15 minutes with a running clock that a goal does not stop, penalty buttons of 1, 2 and 5 minutes, one 60-second timeout per team and half.
Check your competition rules. The factory values follow the rule books named in the user guide. Leagues and age groups differ, so set period lengths, penalty times and shot clock values to your competition before the first match.
The Game tab on the operator PC drives the board window on the second display, the LED wall controller or the NDI stream.
Score, match clock, shot clock, exclusions and timeouts sit on one panel. The clock, shot clock and exclusion timers run by themselves once started; you enter the goals and the exclusions, and the board follows the match rules.

The Period and Penalty Settings window holds every rule the board uses. Pick Water Polo, Canoe Polo, UW Rugby or UW Hockey to load the factory values, then adjust them.

The Chroma Key board draws a compact scorebug and lower thirds on a green, blue or magenta key colour. Key it over the camera picture in vMix, OBS or a vision mixer, or send it over the network with the NDI button (sender name Wp7_NDI).

Each display mode comes with factory designs. Change the fonts, colours and positions of every element and save your own designs for each venue or competition.

Board output of waterBoard7 for the four disciplines, plus info and statistics screens.






waterBoard7 includes a free web-based remote control. Open it in any phone or tablet browser on the venue network, with nothing to install, and log on with the PIN you set in the software. Several phones can be logged on at once, so the match can be run by more than one official at the same time: one on score and clock, one on the shot clock, one on exclusions.

Up to six digits, set and changed in Settings, Remote Control. No PIN, no access.

Display mode, team names, goals, Play and Stop, and the period buttons P1 to P4 and PEN.

Start a team timeout, correct the timeouts used and edit the two lower lines of the board.

Large shot clock with Reset 28, Reset 18 and Clear, for a second phone at the table.

Pick the team, type the cap number and tap 18. Running exclusions are listed with their time left.

Type a playlist number and play it on the scoreboard or in the Advertisement mode, then go back to the scoreboard.
Built for the table. The remote is a web page served by waterBoard7 itself on port 1907. No app store, no account and no internet connection are needed; the phone only has to be on the same network as the PC.
The demo has every feature, including all four disciplines and the remote. The board shows a small DEMO watermark until you add a licence.
waterBoard7 is LED scoreboard software for water polo and related aquatic sports. It runs on Windows 10 and 11 and shows the score, match clock, shot clock, exclusion timers, timeouts, info screens and statistics on a second monitor, projector, LED wall or NDI stream. It is sold as a lifetime licence and includes a free mobile remote.
waterBoard7 supports water polo, canoe polo, underwater rugby and underwater hockey, all in the same licence. Each discipline loads its own factory values for periods, penalties, timeouts and shot clock, and every value can be changed.
The shot clock has two reset buttons, 28 and 18 seconds by default, and runs with the match clock. Exclusions are 18 seconds and show the cap number; up to six can run per team. With the factory rules a goal pauses the clock, resets the shot clock to 28 and ends all running exclusions.
Yes. Canoe polo uses two 10-minute halves, a 60-second shot clock and 2-minute suspensions. Underwater rugby and underwater hockey use two 15-minute halves without a shot clock; underwater hockey runs a running clock with 1, 2 and 5 minute penalties.
Yes. The Chroma Key mode draws a scorebug and lower thirds on a key colour for vMix, OBS or a vision mixer, and the NDI button sends the board over the local network as an NDI source.
Yes. waterBoard7 includes a free web-based remote control. Open it in any phone or tablet browser on the venue network, with nothing to install. Access is protected by a PIN you set inside the software, and several devices can connect at once so different officials can each run one task.
waterBoard7 costs $500 for output up to 1366 px wide and $1,000 up to 3840 px wide (4K). Every licence is a lifetime licence with two years of free updates, a PC key and a USB dongle included. Buying several boards for one venue reduces the price.
Yes. The demo includes every feature with only a small watermark on the output, so you can test waterBoard7 on your own LED display before buying. Download it from the Downloads page.
One payment: $500 up to 1366 px wide, $1,000 up to 3840 px wide. Two years of free updates, PC licence key and USB dongle included, and a discount when you buy several boards for one venue.
waterBoard7 covers water polo and the related codes. For a whole pool, aquaticsBoard7 runs water polo, canoe polo and underwater rugby and hockey together with swimming meets and diving. Each multisport product comes in Lite (from $500) and Pro (from $1,000); Pro also reads scoreboard consoles and timing systems. All multisport products.
Each scoreBoard7 scoreboard covers one sport family. Buying several boards for one venue reduces the price.
Run the perimeter LED panels of any sport from one panel.
Modern, web-based LED perimeter player and playlist manager for the advertising panels around football and every other sport. Uploaded media auto-fits the panel; goals, scores, time-outs, cards and other quick actions cut in with a single click and return. A browser is enough — easy to install, even easier to run.
Tell us the size of your LED wall and the competitions you run, and we will tell you which licence fits.